P1flyingring _hot_ Access

Ironically, a "flying" ring is also used in static applications. On direct-drive extruders, the filament path often has sharp angles. A mounted on a bearing acts as a low-friction guide wheel. Because of its closed-loop design, filament cannot jump out of the guide path, eliminating a common cause of print failures.

def update(self): if not self.active: return p1flyingring

# Define the player group name we are looking for const PLAYER_GROUP = "player" Ironically, a "flying" ring is also used in

: Self-leveling technology that ensures a straight trajectory. Because of its closed-loop design, filament cannot jump

| Symptom | Likely Cause | Solution | | :--- | :--- | :--- | | High-pitched squeal at speed | Ring installed backwards (arrow opposite rotation) | Remove, flip orientation, reinstall | | Vibration at mid-RPM | Debris between ring and shaft | Ultrasonic clean in distilled water, dry with compressed air | | Ring wobbles side-to-side | Bent due to crash or over-torque | Replace immediately (cannot be straightened) | | Sticking or intermittent rotation | Lubricant migrated into ring interface | Lubricant is not needed; clean with alcohol and run dry |