: Requires holding specific buttons simultaneously in a disarmed state until hearing beeps, then cycling through levels using the remote.
: If you need to transport the bike (e.g., on a trailer or ferry), arm the system by pressing Button 1 , then press it a second time within the activation phase. The indicators will flash three times to confirm the motion sensors are off. Synchronization Procedure Gemel Txshs User Manual
If the battery died slowly, the rolling code might be out of sync. Press the button repeatedly while standing next to the car. The Siren Goes Off Randomly : Requires holding specific buttons simultaneously in a
Press both simultaneously for approximately 10 seconds until the remote's LED stops flashing. on a trailer or ferry)