Basic2nd-recovery-system.zip -24 6 Mb- --39-link--39- • Updated

When working with the Basic2nd-recovery-system.zip file, it is essential to consider safety and security. Users should:

Use a USB 2.0 stick (or lower) if the HMI fails to recognize a 3.0 stick. For technical support, refer to the Siemens Industry Support site with entry ID 109744950. Basic2nd-recovery-system.zip -24 6 Mb- --39-LINK--39-

Recovery for KTP400, KTP700, KTP900, and KTP1200 Basic panels. Requirements: A USB stick formatted to When working with the Basic2nd-recovery-system

: Plug the prepared USB stick into the USB port of the HMI. When working with the Basic2nd-recovery-system.zip file

: The HMI should boot into a special recovery interface. Press the "START RECOVERY" button three times as prompted to confirm.